Installing kubeadm

This page shows how to install the kubeadm toolbox. For information on how to create a cluster with kubeadm once you have performed this installation process, see the Creating a cluster with kubeadm page.

This installation guide is for Kubernetes v1.31. If you want to use a different Kubernetes version, please refer to the following pages instead:

Before you begin

  • A compatible Linux host. The Kubernetes project provides generic instructions for Linux distributions based on Debian and Red Hat, and those distributions without a package manager.
  • 2 GB or more of RAM per machine (any less will leave little room for your apps).
  • 2 CPUs or more for control plane machines.
  • Full network connectivity between all machines in the cluster (public or private network is fine).
  • Unique hostname, MAC address, and product_uuid for every node. See here for more details.
  • Certain ports are open on your machines. See here for more details.

Verify the MAC address and product_uuid are unique for every node

  • You can get the MAC address of the network interfaces using the command ip link or ifconfig -a
  • The product_uuid can be checked by using the command sudo cat /sys/class/dmi/id/product_uuid

It is very likely that hardware devices will have unique addresses, although some virtual machines may have identical values. Kubernetes uses these values to uniquely identify the nodes in the cluster. If these values are not unique to each node, the installation process may fail.

Check network adapters

If you have more than one network adapter, and your Kubernetes components are not reachable on the default route, we recommend you add IP route(s) so Kubernetes cluster addresses go via the appropriate adapter.

Check required ports

These required ports need to be open in order for Kubernetes components to communicate with each other. You can use tools like netcat to check if a port is open. For example:

nc 127.0.0.1 6443 -v

The pod network plugin you use may also require certain ports to be open. Since this differs with each pod network plugin, please see the documentation for the plugins about what port(s) those need.

Swap configuration

The default behavior of a kubelet is to fail to start if swap memory is detected on a node. This means that swap should either be disabled or tolerated by kubelet.

  • To tolerate swap, add failSwapOn: false to kubelet configuration or as a command line argument. Note: even if failSwapOn: false is provided, workloads wouldn't have swap access by default. This can be changed by setting a swapBehavior, again in the kubelet configuration file. To use swap, set a swapBehavior other than the default NoSwap setting. See Swap memory management for more details.
  • To disable swap, sudo swapoff -a can be used to disable swapping temporarily. To make this change persistent across reboots, make sure swap is disabled in config files like /etc/fstab, systemd.swap, depending how it was configured on your system.

Installing a container runtime

To run containers in Pods, Kubernetes uses a container runtime.

By default, Kubernetes uses the Container Runtime Interface (CRI) to interface with your chosen container runtime.

If you don't specify a runtime, kubeadm automatically tries to detect an installed container runtime by scanning through a list of known endpoints.

If multiple or no container runtimes are detected kubeadm will throw an error and will request that you specify which one you want to use.

See container runtimes for more information.

The tables below include the known endpoints for supported operating systems:

Linux container runtimes
Runtime Path to Unix domain socket
containerd unix:///var/run/containerd/containerd.sock
CRI-O unix:///var/run/crio/crio.sock
Docker Engine (using cri-dockerd) unix:///var/run/cri-dockerd.sock

Windows container runtimes
Runtime Path to Windows named pipe
containerd npipe:////./pipe/containerd-containerd
Docker Engine (using cri-dockerd) npipe:////./pipe/cri-dockerd

Installing kubeadm, kubelet and kubectl

You will install these packages on all of your machines:

  • kubeadm: the command to bootstrap the cluster.

  • kubelet: the component that runs on all of the machines in your cluster and does things like starting pods and containers.

  • kubectl: the command line util to talk to your cluster.

kubeadm will not install or manage kubelet or kubectl for you, so you will need to ensure they match the version of the Kubernetes control plane you want kubeadm to install for you. If you do not, there is a risk of a version skew occurring that can lead to unexpected, buggy behaviour. However, one minor version skew between the kubelet and the control plane is supported, but the kubelet version may never exceed the API server version. For example, the kubelet running 1.7.0 should be fully compatible with a 1.8.0 API server, but not vice versa.

For information about installing kubectl, see Install and set up kubectl.

For more information on version skews, see:

These instructions are for Kubernetes v1.31.

  1. Update the apt package index and install packages needed to use the Kubernetes apt repository:

    sudo apt-get update
# apt-transport-https may be a dummy package; if so, you can skip that package
sudo apt-get install -y apt-transport-https ca-certificates curl gpg

  2. Download the public signing key for the Kubernetes package repositories. The same signing key is used for all repositories so you can disregard the version in the URL:

    # If the directory `/etc/apt/keyrings` does not exist, it should be created before the curl command, read the note below.
# sudo mkdir -p -m 755 /etc/apt/keyrings
curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.31/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg

  1. Add the appropriate Kubernetes apt repository. Please note that this repository have packages only for Kubernetes 1.31; for other Kubernetes minor versions, you need to change the Kubernetes minor version in the URL to match your desired minor version (you should also check that you are reading the documentation for the version of Kubernetes that you plan to install).

    # This overwrites any existing configuration in /etc/apt/sources.list.d/kubernetes.list
echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.31/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.list

  2. Update the apt package index, install kubelet, kubeadm and kubectl, and pin their version:

    sudo apt-get update
sudo apt-get install -y kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl

  3. (Optional) Enable the kubelet service before running kubeadm:

    sudo systemctl enable --now kubelet

  1. Set SELinux to permissive mode:

    These instructions are for Kubernetes 1.31.

    # Set SELinux in permissive mode (effectively disabling it)
sudo setenforce 0
sudo sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config

  1. Add the Kubernetes yum repository. The exclude parameter in the repository definition ensures that the packages related to Kubernetes are not upgraded upon running yum update as there's a special procedure that must be followed for upgrading Kubernetes. Please note that this repository have packages only for Kubernetes 1.31; for other Kubernetes minor versions, you need to change the Kubernetes minor version in the URL to match your desired minor version (you should also check that you are reading the documentation for the version of Kubernetes that you plan to install).

    # This overwrites any existing configuration in /etc/yum.repos.d/kubernetes.repo
cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/
enabled=1
gpgcheck=1
gpgkey=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/repodata/repomd.xml.key
exclude=kubelet kubeadm kubectl cri-tools kubernetes-cni
EOF

  2. Install kubelet, kubeadm and kubectl:

    sudo yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes

  3. (Optional) Enable the kubelet service before running kubeadm:

    sudo systemctl enable --now kubelet

Install CNI plugins (required for most pod network):

CNI_PLUGINS_VERSION="v1.3.0"
ARCH="amd64"
DEST="/opt/cni/bin"
sudo mkdir -p "$DEST"
curl -L "https://github.com/containernetworking/plugins/releases/download/${CNI_PLUGINS_VERSION}/cni-plugins-linux-${ARCH}-${CNI_PLUGINS_VERSION}.tgz" | sudo tar -C "$DEST" -xz

Define the directory to download command files:

DOWNLOAD_DIR="/usr/local/bin"
sudo mkdir -p "$DOWNLOAD_DIR"

Optionally install crictl (required for interaction with the Container Runtime Interface (CRI), optional for kubeadm):

CRICTL_VERSION="v1.31.0"
ARCH="amd64"
curl -L "https://github.com/kubernetes-sigs/cri-tools/releases/download/${CRICTL_VERSION}/crictl-${CRICTL_VERSION}-linux-${ARCH}.tar.gz" | sudo tar -C $DOWNLOAD_DIR -xz

Install kubeadm, kubelet and add a kubelet systemd service:

RELEASE="$(curl -sSL https://dl.k8s.io/release/stable.txt)"
ARCH="amd64"
cd $DOWNLOAD_DIR
sudo curl -L --remote-name-all https://dl.k8s.io/release/${RELEASE}/bin/linux/${ARCH}/{kubeadm,kubelet}
sudo chmod +x {kubeadm,kubelet}

RELEASE_VERSION="v0.16.2"
curl -sSL "https://raw.githubusercontent.com/kubernetes/release/${RELEASE_VERSION}/cmd/krel/templates/latest/kubelet/kubelet.service" | sed "s:/usr/bin:${DOWNLOAD_DIR}:g" | sudo tee /usr/lib/systemd/system/kubelet.service
sudo mkdir -p /usr/lib/systemd/system/kubelet.service.d
curl -sSL "https://raw.githubusercontent.com/kubernetes/release/${RELEASE_VERSION}/cmd/krel/templates/latest/kubeadm/10-kubeadm.conf" | sed "s:/usr/bin:${DOWNLOAD_DIR}:g" | sudo tee /usr/lib/systemd/system/kubelet.service.d/10-kubeadm.conf

Install kubectl by following the instructions on Install Tools page.

Optionally, enable the kubelet service before running kubeadm:

sudo systemctl enable --now kubelet

The kubelet is now restarting every few seconds, as it waits in a crashloop for kubeadm to tell it what to do.

Configuring a cgroup driver

Both the container runtime and the kubelet have a property called "cgroup driver", which is important for the management of cgroups on Linux machines.

Troubleshooting

If you are running into difficulties with kubeadm, please consult our troubleshooting docs.

What's next

Last modified October 16, 2024 at 9:28 AM PST: Tweak and clean up four kubeadm files (67c5917e32)